We all want happy and healthy lives for our kitchen cabinets to make them appear as good as new for years to come. Over the years they are put through a lot of stress and they have to withstand the effects of various weather conditions that cause them to lose their performance and appearance. Moisture and humidity are the worst of all enemies of wooden cabinets and they must be protected from it at all costs.
After being affected by water, your cabinets can become swollen, the paint can chip off, their lamination and overall finish could get ruined. To make sure this doesn’t happen to your luxury kitchen cabinets in Mississauga, it is important to take some important measures to repair the water-damaged wood cabinets.
Below we have mentioned some easy ways of how you can repair the water damaged wooden cabinets:
Prepare The Cabinets For Repair
The first order of business is to prepare the cabinets for repair. Such as removing the doors from the hinges and carrying them to an area where they can be safely operated. It is recommended you use some garage or shed and use a cover beneath to prevent the floor from getting stained from the paint.
According to the seriousness of the problem, it is recommended to remove the handles, hinges, and doors of the cabinets and any other hardware pieces attached to them so that they can be repaired. Regardless of the water damage, you will find this process easier.
Use A Shellac-Based Primer On The Wood
You can easily find shellac-based primers in most hardware stores and they can be used to repair small blemishes and wooden furniture damage like to our cabinets and doors, etc.
These shellac-based primers usually come in a spray bottle that can easily be applied to damaged areas. It is recommended to use 1 or 2 coats of primer, this will help you even out the surface of the cabinet door.
Apply Plastic Wood filler If Necessary
If your kitchen cabinets are highly damaged then you may want to make use of plastic wood fillers that will help you seal the damage and repair the water damage on the surface area. If your cabinetry is made of particleboard then you will need to do this step thoroughly.
It is recommended that you apply the plastic wood filler straight from the tube, to the surface that is affected the most, and then use a small putty knife to smooth it over. This technique can be altered depending on the situation that you are faced with currently.
Get Sanding That Cabinet Door!
Finally, it’s time to start sanding. Sanding is an important part of this process as it helps you to smooth over the surfaces.
Even at the time of their making, kitchen cabinets are required to be sanded down without any exceptions. If your cabinetry is damaged by water then you may need to sand them once again to make the surface even and to get rid of any bubbling or swollen areas.
Repeat The Previous Steps If Necessary
Depending on the severity of the damage, you will need to repeat the above-mentioned steps if necessary. You can even do them once or twice if you feel like it.
Make use of the primer, wood filler, and sanding process multiple times to make your cabinet door look even and free of water damage.
Cozy Home Toronto kitchen cabinets is a one-stop shop for all your kitchen remodeling and renovation needs.
